Cleaning Service

Focused on air-conditioner cleaning, post-renovation formaldehyde removal and deep cleaning and disinfection. For homes, offices, schools, commercial sites and move-in preparation.

Direct Answer: Cleaning Service

Our cleaning service prioritises air-conditioner cleaning, with post-renovation formaldehyde removal and deep disinfection. After renovation, whole-home cleaning should come before formaldehyde treatment for better results.

Cleaning Service: AC cleaning, formaldehyde removal, disinfection

Key service points

AC cleaning focus

Professional cleaning for window units, split units, cassette/ceiling-concealed units, outdoor units and central AC.

Post-renovation formaldehyde

Testing, decomposition treatment and follow-up advice for newly renovated units.

Deep cleaning & disinfection

For homes, offices, schools and institutions, covering touchpoints, space disinfection and long-lasting coatings.

Eco-safe approach

Emphasis on eco-friendly, low-harm solutions safer for children and pets.

Clean before formaldehyde

Whole-home cleaning should come before formaldehyde treatment to avoid dust affecting coating performance.

Follow-up available

AC cleaning can include maintenance or review arrangements by plan; other services can include follow-up.

Air-conditioner cleaning (primary service)

Long-term AC use accumulates dust, mould, stagnant water and odours, affecting air quality and efficiency. We provide professional AC cleaning and maintenance for homes and commercial sites.

Benefits of AC cleaning

  • Improved air output and indoor air quality
  • Reduced odours, mould and dust buildup
  • Better cooling efficiency and energy performance
  • Extended equipment lifespan
  • Reduced drain pan and drainage issues

AC types we service

Window units

3/4 HP to 3 HP window-type AC cleaning.

Split units

Indoor unit cleaning including coils, fans, vents and drain pan.

Cassette / ceiling-concealed

Four-way cassette and ceiling-concealed split units.

Outdoor units

Condenser coils, fan blades and housing components.

Central AC

Ducted and central systems (subject to on-site specification).

Standard AC cleaning process

Process varies by unit type, but generally includes:

Window units

  1. Lay waterproof protection where needed
  2. Test unit operation before cleaning
  3. Remove filter and front panel
  4. Clean coils, blower, vents, fan and drain pan with AC disinfectant and pressure wash
  5. Clear drain pan and pipe, remove residual wastewater
  6. Rinse filter and panel, dry and reinstall
  7. Test operation after reassembly
  8. Clean work area on completion

Split units

  1. Lay waterproof protection where needed
  2. Test unit operation before cleaning
  3. Remove filter and front panel
  4. Apply AC disinfectant to coils, blower, blades, vents and drain pan
  5. Pressure-wash components
  6. Clear drain pipe
  7. Rinse, dry and reinstall filter and panel
  8. Test operation after reassembly
  9. Clean work area on completion

Cassette / ceiling-concealed

  1. Lay waterproof protection where needed
  2. Test unit operation before cleaning
  3. Remove filter and front panel
  4. Apply AC disinfectant to coils, blower, blades, pump, vents and drain pan
  5. Pressure-wash components
  6. Clear drain pipe
  7. Rinse, dry and reinstall filter and panel
  8. Test operation after reassembly
  9. Clean work area on completion

Outdoor units

  1. Check outdoor unit operation and access requirements
  2. Switch off power and lay waterproof protection where needed
  3. Remove housing panel for cleaning
  4. Apply AC disinfectant to condenser coils and fan blades
  5. Pressure-wash to remove cleaner
  6. Dry and reinstall components
  7. Test outdoor unit operation
Large HP ratings, VRV systems, buildings without lifts or remote districts may require separate quotation. Multi-unit discounts available.

Post-renovation formaldehyde removal

Formaldehyde is a common indoor air pollutant from building materials and new furniture. Release is highest in the first months but can continue for years.

Common formaldehyde sources

  • Plywood, wood products and panels
  • Flooring, carpets and insulation
  • Paints, adhesives and decorative materials
  • New furniture and renovation materials
  • Tobacco smoke (if present on site)

Health impacts

  • Eye, nose and throat irritation
  • Long-term exposure may affect respiratory health
  • Higher risk for pregnancy, infants and sensitive occupants
  • WHO classifies formaldehyde as carcinogenic and teratogenic

We reference indoor air quality guidelines targeting 0.08 ppm (80 ppbv) or below.

Formaldehyde removal process

Step 1: Pre/post measurement

Record formaldehyde levels in each room, living area, bathroom and kitchen; remeasure at same points after treatment.

Step 2: Bio-enzyme spray

Decomposes formaldehyde without light; non-toxic, colourless and odourless.

Step 3: Nano TiO2 photocatalyst coating

Catalytic oxidation under light degrades formaldehyde, benzene and other VOCs; also antibacterial.

Step 4: Ozone treatment (if needed)

Used when site is unoccupied; ventilate and confirm safe ozone levels before re-entry.

Step 5: Service report

Before/after readings, photo records and improvement recommendations.

Clean the whole home before formaldehyde treatment. After treatment, ventilate for 24 hours. No further cleaning is usually needed.

Deep cleaning and disinfection

Professional deep cleaning and disinfection for homes, offices, public/private institutions and schools to improve hygiene and reduce pathogen spread.

Deep cleaning and disinfection
Medical-grade space disinfection

For higher hygiene standard environments.

Long-lasting antimicrobial coating

Persistent protection on high-touch surfaces.

Carpet cleaning

Deep cleaning to remove stains and odours.

Office / home deep cleaning

Comprehensive cleaning of touchpoints and hidden areas.

Post-renovation / move-in cleaning

For new units before or after occupancy.

High-level glass cleaning

Professional window and facade cleaning (subject to site).

Cleaning & disinfection principles

  • Eco-friendly
  • Low harm
  • Safer for children and pets

Other cleaning services

  • Office cleaning
  • Move-in / vacant unit cleaning
  • Exterior wall cleaning
  • Industrial building on-site cleaning
  • Estate on-site cleaning
  • School / estate deep cleaning
  • Carpet cleaning
  • Stone / wood / vinyl floor polishing
  • Marble treatment
  • Deep disinfection service

Suitable sites

  • Homes and move-in preparation
  • Offices and commercial premises
  • Schools, tutorial centres and education sites
  • Public/private institutions, NGOs and healthcare-related sites
  • Pet-friendly homes and families with children

Booking and enquiry

Hong Kong clients can enquire via WhatsApp or phone. Please provide district, site type, AC type/count, area size and required services for quotation.

  • AC cleaning: provide unit type, HP rating, quantity and available time
  • Formaldehyde: specify if newly renovated, area size and move-in date
  • Deep cleaning: specify site type, area and priority zones
WhatsApp: +852 6347 1109

FAQ

How long does AC cleaning take?
Depends on unit type, condition and quantity. Single residential units vary; multi-unit or central systems quoted separately.
Should I clean or remove formaldehyde first after renovation?
Whole-home cleaning must come first. Dust on surfaces reduces formaldehyde coating effectiveness.
When can I re-enter after formaldehyde treatment?
Usually immediately, but allow 3–4 hours for coatings to dry before placing items in cabinets. Ventilate for 24 hours.
Is deep disinfection suitable for pet-friendly homes?
Yes. We select eco-friendlier options and explain any temporary precautions during treatment.
Which districts do you serve?
Hong Kong Island, Kowloon and New Territories. Remote or special sites quoted on enquiry.
WhatsAppCall